Royce Water Technologies
Royce Water Technologies has established an envied reputation as a quality supplier and manufacturer of innovative solutions in the areas of analytical monitoring, control and process improvement in the diverse water and wastewater industry.
We manufacture Dissolved Oxygen Sensors, Hydrostatic Level Sensors and Lagoon Water Moving Aerators forr control of Sludge and Algae. Our range of online Analytical instruments includes measurements for Dissolved Oxygen, MLSS, pH/ORP, NO2, NO3, NH3, COD, BOD, TOC, UV254, FCL, Conductivity, TDS, Turbidity, Biomass Methane Potential, Sulphite, Manganese, Water Levels in Wet Wells/Lift Stations etc. Royce is the authorised factory representative for Chemscan within New Zealand. A featured product at this years Exhibition will be online Sludge Dewatering Optimisation equipment from Valmet which contributes significant savings in Polymer consumption, energy consumption and dewatered solids transportation.
THE NEWS Solutions
TU 8355: Suspended Solids Sensor
C/W, 4-20 mA – RS845 Modbus RTU – Submersible with Autoclean
This Submersible TSS Probe provides a 4-20 mA current loop and a RS485 Modbus output. It has a built-in Jethead for easy water or Air Clean.
The TU 8355 can be interfaced with the MXD73/75 Analyser for easy “value pair” Calibration of the Suspended Solids Matrix.
MXD 73/75: The Multi-Function Analyser
Hundreds of installations in Australasia!
The innovative MXD 70 series of process instruments brings a new dimension to analytical process measurements with the modular design to meet ever changing process requirements.
Measuring: Temperature / pH / ORP(Redox) / Conductivity / Salinity / TDS / Dissolved Oxygen / Turbidity / Suspended Solids (TSS)
Introducing The Aquameta Labs Range of Hydrostatic Level Sensors
State of the art pressure sensors!
Royce Water Technologies now manufactures a line of high quality hydrostatic sensors to measure level in both water and chemical applications.
The CR420 series of 4-20mA pressure transducers are a cost-effective and robust solution designed for continuous water level measurement where a 4-20mA output is required.
Valmet Total Solids: Wastewater Sludge Dewatering Optimisation
Reliable management of wastewater solids
For more than ten years Valmet’s microwavebased solid content transmitters have been used in the process industry for highly demanding applications.
Valmet TS has been developed from third generation microwave solids transmitters, combining cost-efficiency with the extreme accuracy of microwave technology. The new transmitter meets the needs of wastewater treatment plants – with no compromises in accuracy. The 500 references in global waste water industry speak for the excellence.
TU 8525: Turbidity Sensor
C/W, 4-20 mA – RS845 Modbus RTU
This Turbidity Probe provides a 4-20 mA current loop and a RS485 Modbus output.
It can can be inserted either inline or in the dedicated TU910 Turbidity Flow Cell for very low turbidity measurements. The TU 8525 can be interfaced with the MXD73/75 Analyser for easy Calibration of Zero and Span.
Krypton® Multi: The Multiple Channel Water Monitoring System
Reagentless Free and Total Chlorine Measurement with pH Compensation
Controlled and reliable measurements driven by Kuntze Krypton® systems. The measuring system includes all customers need for disinfectant measurement: instrument, sensors, assembly and cables.
The Krypton® Multi is a measuring system for disinfectant, pH and temperature – optional ORP and 5th measuring input (Cl2, TCl or conductivity). Kuntze Krypton® Multi are delivered fully assembled and ready to use.
Introducing The Next Generation RWT G95A
Galvanic dissolved oxygen sensor
The Australasian made RWT G95A is the next generation in Dissolved Oxygen measurement.
We have taken a sensor that was already good and made it better. Galvanic Dissolved Oxygen Sensor are part of Australasia’s most proven range of Dissolved Oxygen Systems with excellent measurement at the low end of the measurement range at zero. They are the preferred choice at many wastewater treatment authorities.
ChemScan® Mini Ammonia Analyzer
For real-time wastewater analysis
The single parameter in-line analyser family from ASA Analytics utilises years of ChemScan® experience and proven technology to provide reliable and accurate analysis of water and waste water.
This device has been designed from the ground up to reduce maintenance requirements, includes large ID sample tubing to minimise plugging and only needs quarterly reagent refills.
Looking for a dissolved oxygen meter or dissolved oxygen analyser? – See our recommended DO measurement solutions
NEW RELEASE PRODUCTS
Biomass Population Measurement Quench-Gone LU-QG21
LU-QG21 Active Biomass Population Measurement – QuenchGone21 Wastewater (QG21W) is the key to a new level of efficiency in biological wastewater treatment plant operation.
QuenchGone21 – Specialty
Product preservation applications – Microbial measurement test kits that provide real-time measurement of microbes in high-solids slurries and chemical solutions.
Quench-Gone21 – Industrial
ATP Microbial Test Kit for high solids water and slurries. Applications in industrial process management.
Microbial ATP Test Kit – QGO-M™
Fastest measurement of total micro-organisms in organic fluids for metalworking, fuel and oilfield applications.
Microbial ATP Test Kit – QGA™
Fast and highly sensitive microbial test kit based on ATP measurement. Perfect for low-solids and low bio-mass applications.
BugCount® Online ATP Analysers
Rapid automatic microbiological testing – Microorganisms are a fact of life in industrial processes. But steps can be taken to minimise the effects of costly microbiological damage like corrosion, product degradation and process inhibition.
Post De-Watering Dry Cake Solids Measurement – Solids measurement of dried wastewater sludge (dry cake) at wastewater treatment plants contribute to significant savings in polymer dosage, energy and dewatered solids transportation.
GeneCount™ In-Field qPCR solution
DNA-based analyser for measuring legionella and sulphur-reducing bacteria.
ChemScan MPX4 Multiparameter Sonde
The ChemScan MPX4 is a cost-effective multiprobe that integrates with plant control systems for long term installation using a local controller, direct connection or wireless telemetry. The probe can also be used for spot-checking utilising Bluetooth data collection.
Designed for multi-paramater analysis of liquids, our probes are the result of 40 years of expertise in the field of electrochemical measurement.
BlueScan Plus – UV/Vis Spectrometer
The BlueScan Plus UV/Vis Spectrometer is capable of simultaneously detecting multiple parameters.
Multi – Sensor Head – Submersible Probe
The Multi Sensor Head (MSH) is a modular sonde that allows the integration of up to four sensors or electrodes in one submersible probe head.