Chemscan® MiniLowAm

Chemscan® MiniLow-Am Reagent Assisted Online Ammonia Analyser for measurement of ammonial in effluent treatment

Category: Tag:
  • Description
  • Features and Benefits
  • Sales and support
  • Technical specifications
  • Downloads

On-line Ammonia Analyser for Effluent

The new single parameter in-line ammonia analyzerutilizes years of ChemScan® experience and proven technology to provide reliable and accurate analysis of water and waste water. This device has been designed from the ground up to reduce maintenance requirements, includes large ID sample tubing to minimize plugging and only needs quarterly reagent refills.



Measurement of ammonia in municipal wastewater effluent treatment

Parameters Ammonia
  • Automatic analysis of ammonia utilizing ChemScan® Proprietary method
  • Low Maintenance
  • Proven Sample Handling with Large ID Flow Paths
  • Simple Field  Calibration
  • Sample Blank to Eliminate Background Interference

Royce Water Technologies provides local sales and support throughout Australia for the ChemScan® product range.

Contact your local Royce Water representative for any sales and support enquiry or use our online contact form to request pricing and other sales information.

Part Number: AS-miniLowAm 
Range (as N):           0.1 – 10.0 ppm
Cycle Interval:        10 minutes to 9999 minutes (field programmable)
Sample Req.:           0.5 – 1 Liter/analysis, pressure 2 to 10 psi, <150 mg/L TSS, <60 NTU
Maintenance:          Reagent replacement every 3 months, pump kit yearly
Accuracy:              2% of value or 2 X detection limit (whichever is greater)

Environment:          5-50 ºC
Power:                   100-240VAC, 50W
Enclosure:              NEMA 4x
Relay Contacts:      1 X SPDT Concentration, 1 X SPDT Programmable
Serial Interface:      Serial RS23
Analogue Output:     Isolated 4-20mA