TU 8325/8525

Turbidity probes

  • Description
  • Technical specifications

These unique probes have been designed to measure Turbidity based on the nephelometric method (ISO 7027 – EN 27027). The probes are available for submersible and in-pipe installations.

The measuring system consists of:

  • Infrared light source,
  • 90 degree scattered light detector,
  • Detector of the clean lens status,
  • 2-wire 4/20 mA analog output,
  • RS 485 digital output
  • Nozzle for the autoclean by external pressured air (TU 8325)

Through commands from the Personal Computer hyperterminal, the serial interface allows the measuring and check signals transmission, the scale selection, the analog or digital operating mode selection, the zero and sensitivity calibration.

Thanks to its 4/20 mA isolated output, the probe can be directly connected to a PLC or data logger, and configured in NTU, g/l, % or other.
The probe can be connected to B&C Electronics controller BC 6587, which provides the power, the measuring readout, 2 set-points, the alarm relay and the holding function for an external cleaning cycle.

The most common applications of this probe include water quality monitoring, municipal and industrial water treatment and aquaculture.

Principle of operation
The Turbidity follows the back nephelometric method (ISO 7027 – EN 27027). A light beam is sent to the sample through an optical lens. The 90 degree scattered light by a suspended particle is collected by the probe through a second lens and it is converted in an electric signal proportional to the Turbidity of the sample.
The probe uses an infrared light and the measuring is not affected by the colour of the sample.

  • Scale 0/4,000 – 0/40,00 – 0/400,0 NTU
  • Sensitivity NTU 70/130 %
  • Zero NTU ± 0,400 NTU all scales
  • Power supply 9/36 VDC
  • Analog output 4/20 mA isolated current Loop
  • Load 600 Ω max. at 24 VDC
  • Digital output RS 485
  • Room temperature -5/50 °C
  • Max. pressure 1 Bar at 25 °C
  • Autoclean by pressure air 3 bar max (TU 8325)
  • Dimensions TU 8325 L=165 mm total, D= 60 mm
  • Dimensions TU 8525 L=143 mm total, D= 40 mm
  • Body PVC
  • Cable 10 m (100 m max.)
  • Protection IP 68